R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

520
[Sysname] interface GigabitEthernet 0/1
[Sysname-GigabitEthernet0/1] multicast boundary 239.2.0.0 16
multicast forwarding-table downstream-limit
Syntax
multicast forwarding-table downstream-limit limit
undo multicast forwarding-table downstream-limit
View
System view
Default level
2: System level
Parameters
limit: Maximum number of downstream nodes (namely, the maximum number of outgoing interfaces) for
a single multicast forwarding entry. The value ranges from 0 to the maximum allowable number.
Description
Use multicast forwarding-table downstream-limit to configure the maximum number of downstream
nodes for a single entry in the multicast forwarding table.
Use undo multicast forwarding-table downstream-limit to restore the default.
By default, the maximum number of downstream nodes for a single multicast forwarding entry is the
maximum number allowed by the system.
The system-allowed maximum number varies with different device models.
Related commands: display multicast forwarding-table.
Examples
# Set the maximum number of downstream nodes for a single multicast forwarding entry in the public
network to 120.
<Sysname> system-view
[Sysname] multicast forwarding-table downstream-limit 120
multicast forwarding-table route-limit
Syntax
multicast forwarding-table route-limit limit
undo multicast forwarding-table route-limit
View
System view
Default level
2: System level
Parameters
limit: Maximum number of entries in the multicast forwarding table. The value ranges from 0 to 4096.