R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

521
Description
Use multicast forwarding-table route-limit to configure the maximum number of entries in the multicast
forwarding table.
Use undo multicast forwarding-table route-limit to restore the maximum number of entries in the
multicast forwarding table to the system default.
By default, the maximum number of entries in the multicast forwarding table is the maximum number
allowed by the system.
Related commands: display multicast forwarding-table.
Examples
# Set the maximum number of entries in the multicast forwarding table in the public network to 200.
<Sysname> system-view
[Sysname] multicast forwarding-table route-limit 200
multicast load-splitting
Syntax
multicast load-splitting { source | source-group }
undo multicast load-splitting
View
System view
Default level
2: System level
Parameters
source: Specifies to implement per-source load splitting.
source-group: Specifies to implement per-source and per-group load splitting simultaneously.
Description
Use multicast load-splitting to enable load splitting of multicast traffic.
Use undo multicast load-splitting to disable load splitting of multicast traffic.
By default, load splitting of multicast traffic is disabled.
Examples
# Enable per-source load splitting of multicast traffic on the public network.
<Sysname> system-view
[Sysname] multicast load-splitting source
multicast longest-match
Syntax
multicast longest-match
undo multicast longest-match