R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

522
View
System view
Default level
2: System level
Parameters
None
Description
Use multicast longest-match to configure the device to select the RPF route based on the longest match
principle, namely, to select the route with the longest mask as the RPF route.
Use undo multicast longest-match to restore the default.
By default, the device selects the route with the highest priority as the RPF route.
Examples
# Configure the device to select the RPF route based on the longest match principle on the public
network.
<Sysname> system-view
[Sysname] multicast longest-match
multicast routing-enable
Syntax
multicast routing-enable
undo multicast routing-enable
View
System view
Default level
2: System level
Parameters
None
Description
Use multicast routing-enable to enable IP multicast routing.
Use undo multicast routing-enable to disable IP multicast routing.
By default, IP multicast routing is disabled.
The device does not forward any multicast packets before IP multicast routing is enabled.
Examples
# Enable IP multicast routing on the public network.
<Sysname> system-view
[Sysname] multicast routing-enable