R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

531
Field Descri
p
tion
Group Address/Group Multicast group address
Member state
Host member states:
• Delay
• Idle
Expires
Remaining time of the multicast group, where "off" means
that the multicast group never times out
Group mode
Multicast source filtering modes:
• Include
• Exclude
Source list
A list of sources joining the same multicast group in the
IGMP proxying group
display igmp routing-table
Syntax
display igmp routing-table [ source-address [ mask { mask | mask-length } ] | group-address [ mask
{ mask | mask-length } ] | flags { act | suc } ] * [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
source-address: Multicast source address.
group-address: Multicast group address, in the range of 224.0.1.0 to 239.255.255.255.
mask: Subnet mask of the multicast group address or multicast source address, 255.255.255.255 by
default.
mask-length: Subnet mask length of the multicast group address or multicast source address. For a
multicast source address, this argument has an effective value range of 0 to 32. For a multicast group
address, this argument has an effective value range of 4 to 32. The system default is 32 in both cases.
flags: Specifies the route flag.
act: Displays the IGMP routes with the ACT flag.
suc: Displays the IGMP routes with the SUC flag.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.