R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

536
<Sysname> display igmp ssm-mapping host interface gigabitethernet 0/1 group 224.1.1.1
source 10.1.1.1
GigabitEthernet0/1(192.168.1.1):
(10.1.1.1, 224.1.1.1)
Host Uptime Expires
1.1.1.1 00:02:20 00:00:40
2.2.2.2 00:02:21 00:00:39
Table 125 Command output
Field Descri
p
tion
GigabitEthernet0/1(192.168.1.1) Interface and IP address
(10.1.1.1, 224.1.1.1) (S, G) entry
Host Host IP address
Uptime Host running duration
Expires
Host expiration time, where "timeout" means that the host
has expired.
fast-leave (IGMP view)
Syntax
fast-leave [ group-policy acl-number ]
undo fast-leave
View
Public network IGMP view
Default level
2: System level
Parameters
acl-number: Basic ACL number, in the range of 2000 to 2999. If you do not include this option in your
command, this command takes effect for all multicast groups.
Description
Use fast-leave to configure fast-leave processing globally.
Use undo fast-leave to disable fast-leave processing globally.
By default, fast-leave processing is disabled. Namely, the IGMP querier sends IGMP group-specific
queries or IGMP group-and-source-specific queries after receiving an IGMP leave message from a host,
instead of sending a leave notification directly to the upstream.
When this command is executed in IGMP view, it takes effect on all Layer 3 interfaces.
Related commands: igmp fast-leave and last-member-query-interval.
Examples
# Enable fast-leave processing globally in the public network.
<Sysname> system-view
[Sysname] igmp