R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

541
View
Interface view
Default level
2: System level
Parameters
None
Description
Use igmp host-tracking to enable the IGMP host tracking function on an interface.
Use undo igmp host-tracking to disable the IGMP host tracking function on an interface
By default, this function is disabled.
Related commands: host-tracking.
Examples
# Enable the IGMP host tracking function on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] igmp host-tracking
igmp last-member-query-interval
Syntax
igmp last-member-query-interval interval
undo igmp last-member-query-interval
View
Interface view
Default level
2: System level
Parameters
interval: IGMP last member query interval in seconds, with an effective range of 1 to 5.
Description
Use igmp last-member-query-interval to configure the last-member query interval, namely, the length of
time that the device waits between sending IGMP group-specific queries, on the current interface.
Use undo igmp last-member-query-interval to restore the default.
By default, the IGMP last member query interval is 1 second.
Related commands: display igmp interface, igmp robust-count, and last-member-query-interval.
Examples
# Set the IGMP last member query interval to 3 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] igmp last-member-query-interval 3