R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

542
igmp max-response-time
Syntax
igmp max-response-time interval
undo igmp max-response-time
View
Interface view
Default level
2: System level
Parameters
interval: Maximum response time in seconds for IGMP general queries, with an effective range of 1 to
25.
Description
Use igmp max-response-time to configure the maximum response time for IGMP general queries on the
current interface.
Use undo igmp max-response-time to restore the default.
By default, the maximum response time for IGMP general queries is 10 seconds.
Related commands: display igmp interface, igmp timer other-querier-present, and max-response-time.
Examples
# Set the maximum response time for IGMP general queries to 8 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] igmp max-response-time 8
igmp proxying enable
Syntax
igmp proxying enable
undo igmp proxying enable
View
Interface view
Default level
2: System level
Parameters
None
Description
Use igmp proxying enable to enable IGMP proxying on an interface.
Use undo igmp proxying enable to disable IGMP proxying on the interface.
By default, IGMP proxying is disabled.