R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

546
View
Interface view
Default level
2: System level
Parameters
None
Description
Use igmp ssm-mapping enable to enable the IGMP SSM mapping feature on the current interface.
Use undo igmp ssm-mapping enable to disable the IGMP SSM mapping feature on the current interface.
By default, the IGMP SSM mapping feature is disabled on all interfaces.
Examples
# Enable the IGMP SSM mapping feature on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] igmp ssm-mapping enable
igmp startup-query-count
Syntax
igmp startup-query-count value
undo igmp startup-query-count
View
Interface view
Default level
2: System level
Parameters
value: Startup query count, namely, the number of queries the IGMP querier sends on startup, with an
effective range of 2 to 5.
Description
Use igmp startup-query-count to configure the startup query count on the current interface.
Use undo igmp startup-query-count to restore the default.
By default, the startup query count is set to the IGMP querier's robustness variable.
Related commands: igmp robust-count and startup-query-count.
Examples
# Set the startup query count to 3 on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] igmp startup-query-count 3