R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

547
igmp startup-query-interval
Syntax
igmp startup-query-interval interval
undo igmp startup-query-interval
View
Interface view
Default level
2: System level
Parameters
interval: Startup query interval in seconds, namely, the interval between general queries that the IGMP
querier sends on startup, with an effective range of 1 to 18000.
Description
Use igmp startup-query-interval to configure the startup query interval on the current interface.
Use undo igmp startup-query-interval to restore the default.
By default, the startup query interval is 1/4 of the IGMP general query interval.
Related commands: igmp timer query and startup-query-interval.
Examples
# Set the startup query interval to 5 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] igmp startup-query-interval 5
igmp static-group
Syntax
igmp static-group group-address [ source source-address ]
undo igmp static-group { all | group-address [ source source-address ] }
View
Interface view
Default level
2: System level
Parameters
group-address: Multicast group address, in the range of 224.0.1.0 to 239.255.255.255.
source-address: Multicast source address.
all: Specifies to remove all static multicast groups that the current interface has joined.
Description
Use igmp static-group to configure the current interface to be a statically connected member of the
specified multicast group or multicast source and group.