R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

555
View
Public network IGMP view
Default level
2: System level
Parameters
group-address: Specifies a multicast group by its IP address, in the range of 224.0.0.0 to
239.255.255.255.
mask: Subnet mask of the multicast group address.
mask-length: Subnet mask length of the multicast group address, in the range of 4 to 32.
source-address: Specifies a multicast source by its IP address.
all: Removes all IGMP SSM mappings.
Description
Use ssm-mapping to configure an IGMP SSM mapping.
Use undo ssm-mapping to remove one or all IGMP SSM mappings.
By default, no IGMP SSM mappings are configured.
Related commands: display igmp ssm-mapping and igmp ssm-mapping enable.
Examples
# Configure an IGMP SSM mapping in the public network for multicast groups in the range of
225 .1.1.0 / 24 a n d m u l t i c a s t s o u rc e 125.1.1.1.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] ssm-mapping 225.1.1.0 24 125.1.1.1
startup-query-count (IGMP view)
Syntax
startup-query-count value
undo startup-query-count
View
Public network IGMP view
Default level
2: System level
Parameters
value: Startup query count, namely, the number of queries that the IGMP querier sends on startup, with
an effective range of 2 to 5.
Description
Use startup-query-count to configure the startup query count globally.
Use undo startup-query-count to restore the default.
By default, the startup query count is set to the IGMP querier's robustness variable.