R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

561
undo c-bsr
View
Public network PIM view
Default level
2: System level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
hash-length: Hash mask length, in the range of 0 to 32. If you do not specify this argument, the
corresponding global setting is used.
priority: Priority of the C-BSR, in the range of 0 to 255. A larger value of this argument means a higher
priority. If you do not specify this argument, the corresponding global setting is used.
Description
Use c-bsr to configure the specified interface as a C-BSR.
Use undo c-bsr to remove the related C-BSR configuration.
No C-BSR is configured by default.
PIM-SM must be enabled on the interface to be configured as a C-BSR.
Related commands: c-bsr hash-length, c-bsr priority, c-rp, and pim sm.
Examples
# Configure GigabitEthernet 0/1 to be a C-BSR in the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-bsr gigabitethernet 0/1
c-bsr admin-scope (PIM view)
Syntax
c-bsr admin-scope
undo c-bsr admin-scope
View
Public network PIM view
Default level
2: System level
Parameters
None
Description
Use c-bsr admin-scope to enable administrative scoping.
Use undo c-bsr admin-scope to disable administrative scoping.
By default, BSR administrative scoping is disabled. Namely, only one BSR exists in a PIM-SM domain.
Related commands: c-bsr, c-bsr global, and c-bsr group.