R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

570
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:48
Candidate RP: 3.3.3.3(Ethernet0/1)
Priority: 200
HoldTime: 90
Advertisement Interval: 50
Next advertisement scheduled at: 00:00:28
Candidate RP: 5.5.5.5(Ethernet0/2)
Priority: 192
HoldTime: 80
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:48
Table 126 Command output
Field Descri
p
tion
Elected BSR Address Address of the elected BSR
Candidate BSR Address Address of the candidate BSR
Priority BSR priority
Hash mask length Hash mask length
State BSR state
Scope Scope of the BSR
Uptime Length of time for which this BSR has been up, in hh:mm:ss
Next BSR message scheduled at Length of time in which the BSR will expire, in hh:mm:ss
Candidate RP Address of the C-RP
Priority Priority of the C-RP
HoldTime Timeout time of the C-RP
Advertisement Interval Interval at which the C-RP sends advertisement messages
Next advertisement scheduled at
Length of time in which the C-RP will send the next advertisement
message, in hh:mm:ss
display pim claimed-route
Syntax
display pim claimed-route [ source-address ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
source-address: Displays information about the unicast route to a particular multicast source. If you do
not provide this argument, this command displays information about all unicast routes used by PIM.