R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

571
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display pim claimed-route to display information about unicast routes used by PIM.
If an (S, G) is marked SPT, this (S, G) entry uses a unicast route.
Examples
# Display information about all unicast routes used by PIM in the public network.
<Sysname> display pim claimed-route
RPF information about: 172.168.0.0
RPF interface: GigabitEthernet0/1, RPF neighbor: 172.168.0.2
Referenced route/mask: 172.168.0.0/24
Referenced route type: unicast (direct)
RPF-route selecting rule: preference-preferred
The (S,G) or (*,G) list dependent on this route entry
(172.168.0.12, 227.0.0.1)
Table 127 Command output
Field Descri
p
tion
RPF information about: 172.168.0.0
Information of the route to the multicast source
172.168.0.0
RPF interface RPF interface type and number
RPF neighbor IP address of the RPF neighbor
Referenced route/mask Address/mask of the referenced route
Referenced route type
Type of the referenced route:
• igp—IGP unicast route
• egp—EGP unicast route
• unicast (direct)—Direct unicast route
• unicast—Other unicast route (such as static unicast
route)
• mbgp—MBGP route
• static multicast—Static multicast route
RPF-route selecting rule Rule of RPF route selection
The (S,G) or (*,G) list dependent on this route entry (S,G) or (*, G) entry list dependent on this RPF route