R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

580
incoming-interface: Displays PIM routing entries that contain the specified interface as the incoming
interface.
interface-type interface-number: Specifies an interface by its type and number.
register: Specifies the register interface. This keyword is valid only if mode-type is not specified or is sm.
outgoing-interface: Displays PIM routing entries of which the outgoing interface is the specified interface.
include: Displays PIM routing entries of which the outgoing interface list includes the specified interface.
exclude: Displays PIM routing entries of which the outgoing interface list excludes the specified interface.
match: Displays PIM routing entries of which the outgoing interface list includes only the specified
interface.
mode mode-type: Specifies a PIM mode, where mode-type can have the following values:
• dm: Specifies PIM-DM.
• sm: Specifies PIM-SM.
• ssm: Specifies PIM-SSM.
flags flag-value: Displays PIM routing entries containing the specified flag or flags. The values of
flag-value and their meanings are as follows:
• 2msdp: Specifies PIM routing entries to be contained in the next SA message to notify an MSDP
peer.
• act: Specifies PIM routing entries that have been used for routing data.
• del: Specifies PIM routing entries scheduled to be deleted.
• exprune: Specifies PIM routing entries containing outgoing interfaces pruned by other multicast
routing protocols.
• ext: Specifies PIM routing entries containing outgoing interfaces provided by other multicast routing
protocols.
• loc: Specifies PIM routing entries on the devices that directly connect to the same subnet as the
multicast source.
• msdp: Specifies PIM routing entries learned from MSDP SA messages.
• niif: Specifies PIM routing entries containing unknown incoming interfaces.
• nonbr: Specifies PIM routing entries with PIM neighbor searching failure.
• rpt: Specifies PIM routing entries on RPT branches where (S, G) prunes have been sent to the RP.
• rq: Specifies PIM routing entries of the receiving side of the switch-MDT switchover.
• spt: Specifies PIM routing entries on the SPT.
•
sq: S
pecifies PIM routing entries of the originator side of switch-MDT switchover.
• swt: Specifies PIM routing entries in the process of RPT-to-SPT switchover.
• wc: Specifies wildcard routing entries.
fsm: Displays information about the state machine.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.