R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

584
Table 135 Command output
Field Descri
p
tion
BSR RP Address is IP address of the RP
Group/MaskLen Multicast group served by the RP
RP IP address of the RP
Priority RP priority
HoldTime RP timeout time
Uptime Length of time for which the RP has been up, in hh:mm:ss
Expires Length of time in which the RP will expire, in hh:mm:ss
RP mapping for this group IP address of the RP serving the current multicast group
hello-option dr-priority (PIM view)
Syntax
hello-option dr-priority priority
undo hello-option dr-priority
View
Public network PIM view
Default level
2: System level
Parameters
priority: Router priority for DR election, in the range of 0 to 4294967295. A larger value of this argument
means a higher priority.
Description
Use hello-option dr-priority to configure the global value of the router priority for DR election.
Use undo hello-option dr-priority to restore the default.
By default, the router priority for DR election is 1.
Related commands: pim hello-option dr-priority.
Examples
# Set the router priority for DR election to 3 in the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] hello-option dr-priority 3
hello-option holdtime (PIM view)
Syntax
hello-option holdtime interval
undo hello-option holdtime