R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

590
Description
Use pim to enter public network PIM view.
Use undo pim to remove all configurations in public network PIM view.
IP multicast routing must be enabled in the corresponding instance before this command can take effect.
Related commands: multicast routing-enable.
Examples
# Enable IP multicast routing in the public network and enter public network PIM view.
<Sysname> system-view
[Sysname] multicast routing-enable
[Sysname] pim
[Sysname-pim]
pim bsr-boundary
Syntax
pim bsr-boundary
undo pim bsr-boundary
View
Interface view
Default level
2: System level
Parameters
None
Description
Use pim bsr-boundary to configure a PIM domain border, namely, a bootstrap message boundary.
Use undo pim bsr-boundary to remove the configured PIM domain border.
By default, no PIM domain border is configured.
Related commands: c-bsr and multicast boundary.
Examples
# Configure GigabitEthernet 0/1 as a PIM domain border.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim bsr-boundary
pim dm
Syntax
pim dm
undo pim dm