R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

592
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim hello-option dr-priority 3
pim hello-option holdtime
Syntax
pim hello-option holdtime interval
undo pim hello-option holdtime
View
Interface view
Default level
2: System level
Parameters
interval: PIM neighbor timeout time in seconds, with an effective range of 1 to 65,535. 65,535 makes
the PIM neighbor always reachable.
Description
Use pim hello-option holdtime to configure the PIM neighbor timeout time on the current interface.
Use undo pim hello-option holdtime to restore the default.
By default, the PIM neighbor timeout time is 105 seconds.
Related commands: hello-option holdtime.
Examples
# Set the PIM neighbor timeout time to 120 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim hello-option holdtime 120
pim hello-option lan-delay
Syntax
pim hello-option lan-delay interval
undo pim hello-option lan-delay
View
Interface view
Default level
2: System level
Parameters
interval: LAN-delay time in milliseconds, with an effective range of 1 to 32,767.