R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

593
Description
Use pim hello-option lan-delay to configure the LAN-delay time, namely, the length of time that the
device waits before forwarding a received prune message, on the current interface.
Use undo pim hello-option lan-delay to restore the default.
By default, the LAN-delay time to 500 milliseconds.
Related commands: hello-option lan-delay, hello-option override-interval, and pim hello-option
override-interval.
Examples
# Set the LAN-delay time to 200 milliseconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim hello-option lan-delay 200
pim hello-option neighbor-tracking
Syntax
pim hello-option neighbor-tracking
undo pim hello-option neighbor-tracking
View
Interface view
Default level
2: System level
Parameters
None
Description
Use pim hello-option neighbor-tracking to disable join suppression, namely, enable neighbor tracking,
on the current interface.
Use undo pim hello-option neighbor-tracking to enable join suppression.
By default, join suppression is enabled. Namely, neighbor tracking is disabled.
Related commands: hello-option neighbor-tracking.
Examples
# Disable join suppression on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim hello-option neighbor-tracking
pim hello-option override-interval
Syntax
pim hello-option override-interval interval
undo pim hello-option override-interval