R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

594
View
Interface view
Default level
2: System level
Parameters
interval: Prune override interval in milliseconds, with an effective range of 1 to 65,535.
Description
Use pim hello-option override-interval to configure the prune override interval on the current interface.
Use undo pim hello-option override-interval to restore the default.
By default, the prune override interval is 2,500 milliseconds.
Related commands: hello-option lan-delay, hello-option override-interval, and pim hello-option
lan-delay.
Examples
# Set the prune override interval to 2,000 milliseconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim hello-option override-interval 2000
pim holdtime assert
Syntax
pim holdtime assert interval
undo pim holdtime assert
View
Interface view
Default level
2: System level
Parameters
interval: Assert timeout time in seconds, with an effective range of 7 to 2,147,483,647.
Description
Use pim holdtime assert to configure the assert timeout time on the current interface.
Use undo pim holdtime assert to restore the default.
By default, the assert timeout time is 180 seconds.
Related commands: holdtime assert, holdtime join-prune, and pim holdtime join-prune.
Examples
# Set the assert timeout time to 100 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim holdtime assert 100