R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

595
pim holdtime join-prune
Syntax
pim holdtime join-prune interval
undo pim holdtime join-prune
View
Interface view
Default level
2: System level
Parameters
interval: Join/prune timeout time in seconds, with an effective range of 1 to 65,535.
Description
Use pim holdtime join-prune to configure the join/prune timeout time on the interface.
Use undo pim holdtime join-prune to restore the default.
By default, the join/prune timeout time is 210 seconds.
Related commands: holdtime assert, holdtime join-prune, and pim holdtime assert.
Examples
# Set the join/prune timeout time to 280 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim holdtime join-prune 280
pim neighbor-policy
Syntax
pim neighbor-policy acl-number
undo pim neighbor-policy
View
Interface view
Default level
2: System level
Parameters
acl-number: Basic ACL number, in the range of 2000 to 2999. When the ACL is defined, the source
keyword in the rule command specifies a legal source address range for hello messages.
Description
Use pim neighbor-policy to configure a legal source address range for hello messages to guard against
hello message spoofing.
Use undo pim neighbor-policy to restore the default.