R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

597
Default level
2: System level
Parameters
None
Description
Use pim sm to enable PIM-SM.
Use undo pim sm to disable PIM-SM.
By default, PIM-SM is disabled.
This command can take effect only after IP multicast routing is enabled in the corresponding instance.
Related commands: pim dm and multicast routing-enable.
Examples
# Enable IP multicast routing in the public network, and enable PIM-SM on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] multicast routing-enable
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim sm
pim state-refresh-capable
Syntax
pim state-refresh-capable
undo pim state-refresh-capable
View
Interface view
Default level
2: System level
Parameters
None
Description
Use pim state-refresh-capable to enable the state fresh feature on the interface.
Use undo pim state-refresh-capable to disable the state fresh feature.
By default, the state refresh feature is enabled.
Related commands: state-refresh-interval, state-refresh-rate-limit, and state-refresh-ttl.
Examples
# Disable state refresh on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] undo pim state-refresh-capable