R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

600
Use undo pim triggered-hello-delay to restore the default.
By default, the maximum delay between hello messages is 5 seconds.
Examples
# Set the maximum delay between hello messages to 3 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim trigged-hello-delay 3
probe-interval (PIM view)
Syntax
probe-interval interval
undo probe-interval
View
Public network PIM view
Default level
2: System level
Parameters
interval: Register probe time in seconds, with an effective range of 1 to 1799.
Description
Use probe-interval to configure the register probe time.
Use undo probe-interval to restore the default.
By default, the register probe time is 5 seconds.
Related commands: register-suppression-timeout.
Examples
# Set the register probe time to 6 seconds in the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] probe-interval 6
prune delay (PIM view)
Syntax
prune delay interval
undo prune delay
View
Public network PIM view
Default level
2: System level