R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

603
Examples
# Configure the router to calculate the checksum based on the entire register message in the public
network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] register-whole-checksum
reset pim control-message counters
Syntax
reset pim control-message counters [ interface interface-type interface-number ]
View
User view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies to reset the PIM control message counter on a
particular interface. If no interface is specified, this command will clear the statistics information of PIM
control messages on all interfaces.
Description
Use reset pim control-message counters to reset PIM control message counters.
Examples
# Reset PIM control message counters on all interfaces in the public network.
<Sysname> reset pim control-message counters
source-lifetime (PIM view)
Syntax
source-lifetime interval
undo source-lifetime
View
Public network PIM view
Default level
2: System level
Parameters
interval: Multicast source lifetime in seconds, with an effective range of 1 to 31,536,000.
Description
Use source-lifetime to configure the multicast source lifetime.
Use undo source-lifetime to restore the default.
By default, the lifetime of a multicast source is 210 seconds.