R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

614
Export policy: none
Information about SA-Requests:
Policy to accept SA-Request messages: none
Sending SA-Requests status: disable
Minimum TTL to forward SA with encapsulated data: 0
SAs learned from this peer: 0, SA-cache maximum for the peer: none
Input queue size: 0, Output queue size: 0
Counters for MSDP message:
Count of RPF check failure: 0
Incoming/outgoing SA messages: 0/0
Incoming/outgoing SA requests: 0/0
Incoming/outgoing SA responses: 0/0
Incoming/outgoing data packets: 0/0
Table 137 Command output
Field Descri
p
tion
MSDP Peer MSDP peer address.
AS
Number of the AS where the MSDP peer is located. "?" indicates that the
system could not obtain the AS number.
State
MSDP peer status:
• Up—Session set up; MSDP peer in session.
• Listen—Session set up; local device as server, in listening state.
• Connect—Session not set up; local device as client, in connecting
state.
• Shutdown—Deactivated.
• Down—Connection failed.
Resets Number of times the MSDP peer connection is reset.
Up/Down time Length of time since MSDP peer connection was established/failed.
Connection interface
Interface and its IP address used for setting up a TCP connection with the
remote MSDP peer.
Number of sent/received
messages
Number of SA messages sent and received through this connection.
Number of discarded output
messages
Number of discarded outgoing messages.
Elapsed time since last connection
or counters clear
Time passed since the information of the MSDP peer was last cleared.
Information about (Source,
Group)-based SA filtering policy
SA message filtering list information
• Import policy—Filter list for receiving SA messages from the specified
MSDP peer.
• Export policy—Filter list for forwarding SA messages from the
specified MSDP peer.
Information about SA-Requests
SA requests information
• Policy to accept SA-Request messages—Filtering rule for receiving or
forwarding SA messages from the specified MSDP peer.
• Sending SA-Requests status—Whether enabled to send an SA
request message to the designated MSDP peer after receiving a new
Join message.