R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

616
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display msdp sa-cache to display information about (S, G) entries in the SA cache.
This command gives the corresponding output only after the cache-sa-enable command is executed.
If you provide neither a group address nor a source address, this command displays information about
all cached (S, G) entries.
Related commands: cache-sa-enable.
Examples
# Display information about (S, G) entries in the SA cache in the public network.
<Sysname> display msdp sa-cache
MSDP Total Source-Active Cache - 5 entries
MSDP matched 5 entries
(Source, Group) Origin RP Pro AS Uptime Expires
(10.10.1.2, 225.1.1.1) 10.10.10.10 BGP 100 00:00:11 00:05:49
(10.10.1.3, 225.1.1.1) 10.10.10.10 BGP 100 00:00:11 00:05:49
(10.10.1.2, 225.1.1.2) 10.10.10.10 BGP 100 00:00:11 00:05:49
(10.10.2.1, 225.1.1.2) 10.10.10.10 BGP 100 00:00:11 00:05:49
(10.10.1.2, 225.1.2.2) 10.10.10.10 BGP 100 00:00:11 00:05:49
Table 138 Command output
Field Descri
p
tion
MSDP Total Source-Active Cache - 5 entries Total number of (S, G) entries in the SA cache.
MSDP matched 5 entries Total number of (S, G) entries matched by MSDP.
(Source, Group) (S, G) entry: (source address, group address).
Origin RP Address of the RP that generated the (S, G) entry.
Pro
Type of protocol from which the AS number is originated. "?"
indicates that the system could not obtain the protocol type.
AS
AS number of the origin RP. "?" indicates that the system
could not obtain the AS number.
Uptime
Length of time for which the cached (S, G) entry has been
existing, in hours:minutes:seconds.
Expires
Length of time in which the cached (S, G) entry will expire, in
hours:minutes:seconds.
display msdp sa-count
Syntax
display msdp sa-count [ as-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view