R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

618
encap-data-enable
Syntax
encap-data-enable
undo encap-data-enable
View
Public network MSDP view
Default level
2: System level
Parameters
None
Description
Use encap-data-enable to enable encapsulation of multicast data in SA messages.
Use undo encap-data-enable to restore the default.
By default, an SA message contains only an (S, G) entry. No multicast data is encapsulated in an SA
message.
Examples
# Enable encapsulation of multicast data in SA messages in the public network.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] encap-data-enable
import-source
Syntax
import-source [ acl acl-number ]
undo import-source
View
Public network MSDP view
Default level
2: System level
Parameters
acl-number: Basic or advanced ACL number, in the range of 2000 to 3999. A basic ACL filters multicast
sources, and an advanced ACL filters multicast sources or multicast groups. If you do not provide this
argument in your command, no multicast source information will be advertised.
NOTE:
During ACL matching, the protocol ID in the ACL rule is not checked.
Description
Use import-source to configure a rule of creating (S, G) entries.