R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

620
[Sysname-msdp]
originating-rp
Syntax
originating-rp interface-type interface-number
undo originating-rp
View
Public network MSDP view
Default level
2: System level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use originating-rp to configure the address of the specified interface as the RP address of SA messages.
Use undo originating-rp to restore the default.
Be default, the PIM RP address is used as the RP address of SA messages.
Examples
# Specify the IP address of GigabitEthernet 0/1 as the RP address of SA messages in the public network.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] originating-rp gigabitethernet 0/1
peer connect-interface
Syntax
peer peer-address connect-interface interface-type interface-number
undo peer peer-address
View
Public network MSDP view
Default level
2: System level
Parameters
peer-address: MSDP peer address.
interface-type interface-number: Specifies an interface by its type and number. The local device will use
the IP address of the specified interface as the source IP address when setting up a TCP connection with
the remote MSDP peer.
Description
Use peer connect-interface to create an MSDP peer connection.
Use undo peer connect-interface to remove an MSDP peer connection.