R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

621
No MSDP peer connection is created by default.
Be sure to execute this command before you use any other peer command. Otherwise the system will
prompt that the peer does not exist.
Related commands: static-rpf-peer.
Examples
# Configure the router with the IP address of 125.10.7.6 in the public network as the MSDP peer of the
local router, with interface GigabitEthernet 0/1 as the local connection port.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 connect-interface gigabitethernet 0/1
peer description
Syntax
peer peer-address description text
undo peer peer-address description
View
Public network MSDP view
Default level
2: System level
Parameters
peer-address: MSDP peer address.
text: Descriptive string of 1 to 80 case-sensitive characters including spaces.
Description
Use peer description to configure the description information for the specified MSDP peer.
Use undo peer description to delete the configured description information of the specified MSDP peer.
By default, an MSDP peer has no description information.
Related commands: display msdp peer-status.
Examples
# In the public network, add the descriptive text "CustomerA" for the router with the IP address of
125.10.7.6 to indicate that this router is Customer A.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 description CustomerA
peer mesh-group
Syntax
peer peer-address mesh-group name
undo peer peer-address mesh-group