R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

622
View
Public network MSDP view
Default level
2: System level
Parameters
peer-address: MSDP peer address.
name: Mesh group name, a case-sensitive string of 1 to 32 characters. A mesh group name must not
contain any space.
Description
Use peer mesh-group to configure an MSDP peer as a mesh group member.
Use undo peer mesh-group to remove an MSDP peer as a mesh group member.
By default, an MSDP peer does not belong to any mesh group.
Examples
# In the public network, configure the MSDP peer with the IP address of 125.10.7.6 as a member of the
mesh group "Group1".
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 mesh-group Group1
peer minimum-ttl
Syntax
peer peer-address minimum-ttl ttl-value
undo peer peer-address minimum-ttl
View
Public network MSDP view
Default level
2: System level
Parameters
peer-address: MSDP peer address.
ttl-value: Time-to-Live (TTL) threshold, in the range of 0 to 255.
Description
Use peer minimum-ttl to configure the TTL threshold for multicast data packet encapsulation in SA
messages.
Use undo peer minimum-ttl to restore the default.
By default, the TTL threshold for a multicast packet to be encapsulated in an SA message is 0.
Related commands: display msdp peer-status.