R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

41
Description
Use display ip interface brief to display brief IP configuration information for a specific Layer 3 interface
or all Layer 3 interfaces.
Without the interface type and interface number specified, the brief IP configuration information for all
Layer 3 interfaces is displayed.
With only the interface type specified, the brief IP configuration information for all Layer 3 interfaces of
the specified type is displayed.
With both the interface type and interface number specified, only the brief IP configuration information
for the specified interface is displayed.
Related commands: display ip interface.
Examples
# Display brief IP configuration information for GigabitEthernet interfaces.
<Sysname> display ip interface GigabitEthernet brief
*down: administratively down
(s): spoofing
Interface Physical Protocol IP Address Description
GE0/1 up up 192.168.20.144 Ethernet1...
GE0/2 down down unassigned Client1
Table 10 Command output
Field Descri
p
tion
*down:
administratively down
The interface is administratively shut down with the shutdown command.
(s) : spoofing
Spoofing attribute of the interface. It indicates that an interface may have no link
present even when its link layer protocol is displayed up or the link is set up only on
demand.
Interface Interface name
Physical
Physical state of the interface:
• *down—The interface is administratively down; that is, the interface is shut down
with the shutdown command.
• down—The interface is administratively up but its physical state is down.
• up—Both the administrative and physical states of the interface are up.
Protocol
Link layer protocol state of the interface:
• down—The protocol state of the interface is down.
• up—The protocol state of the interface is up.
• up(s)—The protocol state of the interface is up (spoofing).
IP Address IP address of the interface (If no IP address is configured, "unassigned" is displayed.)
Description
Interface description information, for which at most 12 characters can be displayed.
If there are more that 12 characters, only the first nine characters are displayed.
ip address
Syntax
ip address ip-address { mask-length | mask } [ sub ]