R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

637
Table 144 Command output
Field Descri
p
tion
IPv6 Address IPv6 address of a neighbor.
Link-layer Link layer address (MAC address) of a neighbor.
VID VLAN to which the interface connected with a neighbor belongs.
Interface Interface connected with a neighbor.
State
State of a neighbor:
• INCMP—The address is being resolved. The link layer address of the neighbor is
unknown.
• REACH—The neighbor is reachable.
• STALE—The reachability of the neighbor is unknown. The firewall will not verify the
reachability any longer unless data is sent to the neighbor.
• DELAY—The reachability of the neighbor is unknown. The firewall sends an NS
message after a delay.
• PROBE—The reachability of the neighbor is unknown. The firewall sends an NS
message to verify the reachability of the neighbor.
Type
Type of neighbor information, including static configuration (represented by S) and
dynamic acquisition (represented by D).
Age
For a static entry, a hyphen (-) is displayed. For a dynamic entry, the reachable time
(in seconds) elapsed is displayed, and if it is never reachable, a pound sign (#) is
displayed (for a neighbor acquired dynamically).
display ipv6 neighbors count
Syntax
display ipv6 neighbors { all | dynamic | interface interface-type interface-number | static | vlan vlan-id }
count [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Displays the total number of all neighbor entries, including neighbor entries acquired dynamically
and configured statically.
dynamic: Displays the total number of all neighbor entries acquired dynamically.
static: Displays the total number of neighbor entries configured statically.
interface interface-type interface-number: Displays the total number of neighbor entries of a specified
interface.
vlan vlan-id: Displays the total number of neighbor entries of a specified VLAN whose ID ranges from 1
to 4094.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.