R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

655

generated link-local address will not take effect and the link-local address of an interface is still the

manually assigned one. If you delete the manually assigned address, the automatically generated

link-local address is validated. For automatic generation of an IPv6 link-local address, see the ipv6

address auto link-local command.

Examples

# Configure a link-local address for GigabitEthernet 0/1.

<Sysname> system-view

[Sysname] interface gigabitethernet 0/1

[Sysname-GigabitEthernet0/1] ipv6 address fe80::1 link-local

ipv6 fib-loadbalance-type hash-based

Syntax

ipv6 fib-loadbalance-type hash-based

undo ipv6 fib-loadbalance-type hash-based

View

System view

Default level

2: System level

Parameters

None

Description

Use ipv6 fib-loadbalance-type hash-based to enable load sharing based on the HASH algorithm for

packet forwarding.

Use undo ipv6 fib-loadbalance-type hash-based to restore the default.

By default, load sharing based on polling is adopted. ECMP routes are used in turn to forward packets.

Examples

# Enable load sharing based on the HASH algorithm for packet forwarding.