R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

658
ipv6 nd autoconfig managed-address-flag
Syntax
ipv6 nd autoconfig managed-address-flag
undo ipv6 nd autoconfig managed-address-flag
View
Interface view
Default level
2: System level
Parameters
None
Description
Use ipv6 nd autoconfig managed-address-flag to set the managed address configuration (M) flag to 1
so that the host can acquire an IPv6 address through stateful autoconfiguration (for example, from a
DHCP server).
Use undo ipv6 nd autoconfig managed-address-flag to restore the default.
By default, the M flag is set to 0 so that the host can acquire an IPv6 address through stateless
autoconfiguration.
Examples
# Configure the host to acquire an IPv6 address through stateful autoconfiguration.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ipv6 nd autoconfig managed-address-flag
ipv6 nd autoconfig other-flag
Syntax
ipv6 nd autoconfig other-flag
undo ipv6 nd autoconfig other-flag
View
Interface view
Default level
2: System level
Parameters
None
Description
Use ipv6 nd autoconfig other-flag to set the other stateful configuration flag (O) to 1 so that the host can
acquire information other than IPv6 address through stateful autoconfiguration (for example, from a
DHCP server).
Use undo ipv6 nd autoconfig other-flag to restore the default.