R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

659
By default, the O flag is set to 0 so that the host can acquire other information through stateless
autoconfiguration.
Examples
# Configure the host to acquire information other than IPv6 address through stateless autoconfiguration.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] undo ipv6 nd autoconfig other-flag
ipv6 nd dad attempts
Syntax
ipv6 nd dad attempts value
undo ipv6 nd dad attempts
View
Interface view
Default level
2: System level
Parameters
value: Number of attempts to send an NS message for DAD, in the range of 0 to 600. The default value
is "1". When it is set to 0, DAD is disabled.
Description
Use ipv6 nd dad attempts to configure the number of attempts to send an NS message for DAD.
Use undo ipv6 nd dad attempts to restore the default.
By default, the number of attempts to send an NS message for DAD is 1.
Related commands: display ipv6 interface.
Examples
# Set the number of attempts to send an NS message for DAD to 20.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ipv6 nd dad attempts 20
ipv6 nd hop-limit
Syntax
ipv6 nd hop-limit value
undo ipv6 nd hop-limit
View
System view
Default level
2: System level