R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

661
ipv6 nd nud reachable-time
Syntax
ipv6 nd nud reachable-time value
undo ipv6 nd nud reachable-time
View
Interface view
Default level
2: System level
Parameters
value: Neighbor reachable time in milliseconds, in the range of 1 to 3,600,000.
Description
Use ipv6 nd nud reachable-time to configure the neighbor reachable time on an interface. This time
value serves as not only the neighbor reachable time on the local interface, but also the value of the
Reachable Time field in RA messages sent by the local interface.
Use undo ipv6 nd nud reachable-time to restore the default.
By default, the neighbor reachable time on the local interface is 30,000 milliseconds and the value of
the Reachable Time field in RA messages is 0, so that the reachable time is determined by the receiving
device.
Related commands: display ipv6 interface.
Examples
# Set the neighbor reachable time on GigabitEthernet 0/1 to 10,000 milliseconds.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ipv6 nd nud reachable-time 10000
ipv6 nd proxy enable
Syntax
ipv6 nd proxy enable
undo ipv6 nd proxy enable
View
Layer 3 Ethernet interface view, Layer 3 Ethernet subinterface view
Default level
2: System level
Parameters
None
Description
Use ipv6 nd proxy enable to enable ND proxy.
Use undo ipv6 nd proxy enable to restore the default.