R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

666
Examples
# Configure a static neighbor entry for Layer 3 interface GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] ipv6 neighbor 2000::1 fe-e0-89 interface gigabitethernet 0/1
ipv6 neighbor stale-aging
Syntax
ipv6 neighbor stale-aging aging-time
undo ipv6 neighbor stale-aging
View
System view
Default level
2: System level
Parameters
aging-time: Age timer for ND entries in stale state, ranging from 1 to 24 hours.
Description
Use ipv6 neighbor stale-aging to set the age timer for ND entries in stale state.
Use undo ipv6 neighbor stale-aging to restore the default.
By default, the age timer for ND entries in stale state is four hours.
Examples
# Set the age timer for ND entries in stale state to two hours.
<Sysname> system-view
[Sysname] ipv6 neighbor stale-aging 2
ipv6 neighbors max-learning-num
Syntax
ipv6 neighbors max-learning-num number
undo ipv6 neighbors max-learning-num
View
Interface view
Default level
2: System level
Parameters
number: Maximum number of neighbors that can be dynamically learned by the interface, ranging from
1 to 4096.
Description
Use ipv6 neighbors max-learning-num to configure the maximum number of neighbors that can be
dynamically learned on the interface.