R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

683
Description
Use ds-lite address to specify the address of the AFTR.
Use undo ds-lite address to delete the address of the AFTR.
The address of the AFTR is not specified by default.
When you configure a DS-lite tunnel, the Customer Premises Equipment (CPE) sends a DHCPv6 request
to obtain the address of the AFTR. Upon receiving the request, the DHCPv6 server sends the address of
the AFTR to the CPE. For more information about the DS-lite tunnel, see VPN Configuration Guide.
You can specify only one AFTR address for an address pool. The latest setting overrides the previous one.
Examples
# Specify the AFTR address as 2::1.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] ds-lite address 2::1
ipv6 dhcp pool
Syntax
ipv6 dhcp pool pool-number
undo ipv6 dhcp pool pool-number
View
System view
Default level
2: System level
Parameters
pool-number: Address pool number. The value ranges from 1 to 128.
Description
Use ipv6 dhcp pool to create a DHCPv6 address pool and enter DHCPv6 address pool view, or enter
DHCPv6 address pool view if the specified address pool already exists.
Use undo ipv6 dhcp pool to remove the address pool.
No DHCPv6 address pool is configured by default.
Examples
# Create DHCPv6 address pool 1 and enter its view.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1]
ipv6 dhcp prefix-pool
Syntax
ipv6 dhcp prefix-pool prefix-pool-number prefix prefix/prefix-len assign-len assign-len
undo ipv6 dhcp prefix-pool prefix-pool-number