R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

694
DHCPv6 client configuration commands
display ipv6 dhcp client
Syntax
display ipv6 dhcp client [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Displays the DHCPv6 client information of a specified
interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ipv6 dhcp client to display DHCPv6 client information.
With no parameters specified, the DHCPv6 client information of all the interfaces is displayed.
Examples
# Display the DHCPv6 client information of GigabitEthernet 0/1.
<Sysname> display ipv6 dhcp client interface gigabitethernet 0/1
GigabitEthernet0/1 is in stateless DHCPv6 client mode
State is OPEN
Preferred Server:
Reachable via address : FE80::213:7FFF:FEF6:C818
DUID : 0003000100137ff6c818
DNS servers : 1:2:3::5
1:2:4::7
Domain names : abc.com
Table 160 Command output
Field Descri
p
tion
in stateless DHCPv6 client
mode
Indicates the client is in the stateless DHCPv6 configuration mode.