R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

714
process-id: Process ID, in the range of 1 to 65535. The default is 1.This argument is available only when
the protocol is ospfv3 or ripng.
cost: Routing metric of redistributed routes, in the range of 0 to 16. If cost value is not specified, the metric
is the default metric specified by the default cost command.
route-policy route-policy-name: Specifies a routing policy by its name with 1 to 63 case-sensitive
characters.
allow-ibgp: Optional keyword when the specified protocol is bgp4+.
Description
Use import-route to redistribute routes from another routing protocol.
Use undo import-route to disable redistributing routes from another routing protocol.
By default, RIPng does not redistribute routes from other routing protocols.
The following matrix shows the argument and firewall compatibility:
Ar
g
ument F1000-A-EI/S-EI F1000-E F5000 Firewall module
protocol
Yes.
Excludes isisv6.
Yes.
Excludes isisv6.
Yes.
Includes isisv6.
Yes.
Excludes isisv6.
CAUTION:
The import-route bgp4+ command redistributes only eBGP routes. The import-route bgp4+ allow-ibgp
command redistributes additionally iBGP routes. Be cautious when you use the latter command.
Related commands: default cost.
Examples
# Redistribute OSPFv3 routes.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] import-route ospfv3
maximum load-balancing (RIPng view)
Syntax
maximum load-balancing number
undo maximum load-balancing
View
RIPng view
Default level
2: System level
Parameters
number: Maximum number of equal-cost routes, which ranges from 1 to 8.
Description
Use maximum load-balancing to specify the maximum number of equal-cost routes.