R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

719
ripng ipsec-policy
Syntax
ripng ipsec-policy policy-name
undo ripng ipsec-policy
View
Interface view
Default level
2: System level
Parameters
policy-name: IPsec policy name, a string of 1 to 15 characters.
Description
Use ripng ipsec-policy to apply an IPsec policy on a RIPng interface.
Use undo ripng ipsec-policy to remove the IPsec policy from the RIPng interface.
By default, no IPsec policy is configured for the RIPng interface.
The IPsec policy to be applied must have been configured.
Examples
# Apply IPsec policy policy001 to interface GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ripng ipsec-policy policy001
ripng metricin
Syntax
ripng metricin value
undo ripng metricin
View
Interface view
Default level
2: System level
Parameters
value: Additional metric for received routes, in the range of 0 to 16.
Description
Use ripng metricin to specify an additional metric for received RIPng routes.
Use undo ripng metricin to restore the default.
By default, the additional metric to received routes is 0.
Related commands: ripng metricout.