R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

721
Description
Use ripng poison-reverse to enable the poison reverse function.
Use undo ripng poison-reverse to disable the poison reverse function.
By default, the poison reverse function is disabled.
Examples
# Enable the poison reverse function for RIPng update messages on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ripng poison-reverse
ripng split-horizon
Syntax
ripng split-horizon
undo ripng split-horizon
View
Interface view
Default level
2: System level
Parameters
None
Description
Use ripng split-horizon to enable the split horizon function.
Use undo ripng split-horizon to disable the split horizon function.
By default, the split horizon function is enabled.
The split horizon function is necessary for preventing routing loops. Do not disable it unless you make
sure that it is necessary.
NOTE:
If both the poison reverse and split horizon functions are enabled, only the poison reverse function takes
effect.
Examples
# Enable the split horizon function on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ripng split-horizon
ripng summary-address
Syntax
ripng summary-address ipv6-address prefix-length