R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

51
Field Descri
p
tion
Description Description of the VLAN.
Name Name configured for the VLAN.
IP Address
Primary IP address of the VLAN interface (available only when an IP address is
configured for the VLAN interface). To display secondary IP addresses, use the
display interface vlan-interface command in any view or the display this
command in VLAN interface view.
Subnet Mask
Subnet mask of the primary IP address (available only when an IP address is
configured for the VLAN interface).
Tagged Ports Ports through which VLAN packets are sent tagged.
Untagged Ports Ports through which VLAN packets are sent untagged.
interface vlan-interface
Syntax
interface vlan-interface vlan-interface-id
undo interface vlan-interface vlan-interface-id
View
System view
Default level
2: System level
Parameters
vlan-interface-id: Specifies a VLAN interface number, ranging from 1 to 4094.
Description
Use interface vlan-interface to create a VLAN interface and enter its view or enter the view of an existing
VLAN interface.
Use undo interface vlan-interface to remove the specified VLAN interface.
Create the VLAN before you create the VLAN interface.
To configure an IP address for a VLAN interface that will perform IP routing, use the ip address command
in VLAN interface view.
Related commands: display interface vlan-interface.
Examples
# Create VLAN-interface 2.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] quit
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2]