R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

739
Description
Use display ospfv3 peer statistic to display information about all OSPFv3 neighbors on the
router—numbers of neighbors in different states.
Examples
# Display information about all OSPFv3 neighbors.
<Sysname> display ospfv3 peer statistic
OSPFv3 Router with ID (1.1.1.1) (Process 1)
Neighbor Statistics
----------------------------------------------------------------------
Area ID Down Init 2-way ExStar Exchange Loading Full
0.0.0.0 0 0 0 0 0 0 1
Total 0 0 0 0 0 0 1
Table 177 Command output
Field Descri
p
tion
Area ID Area ID
Down
In this state, neighbor initial state, the router has not received any information from a
neighboring router for a period of time.
Init
In this state, the device received a Hello packet from the neighbor but the packet
contains no Router ID of the neighbor. Mutual communication is not setup.
2-Way
Indicates mutual communication between the router and its neighbor is available.
DR/BDR election is finished under this state (or higher).
ExStart
In this state, the router decides on the initial DD sequence number and master/slave
relationship of the two parties.
Exchange In this state, the router exchanges DD packets with the neighbor.
Loading In this state, the router sends LSRs to request the neighbor for needed LSAs.
Full Indicates LSDB synchronization has been accomplished between neighbors.
Total Total number of neighbors under the same state
display ospfv3 request-list
Syntax
display ospfv3 [ process-id ] request-list [ { external | inter-prefix | inter-router | intra-prefix | link |
network | router } [ link-state-id ] [ originate-router ip-address ] | statistics ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: OSPFv3 process ID, in the range of 1 to 65535.