R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

746
area-id: ID of an area, a decimal integer (in the range of 0 to 4294967295) that is translated into IPv4
address format by the system or an IPv4 address.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospfv3 topology to display OSPFv3 topology information. If no process is specified,
topology information of all OSPFv3 processes is displayed.
Examples
# Display OSPFv3 area 1 topology information.
<Sysname> display ospfv3 topology area 1
OSPFv3 Process (1)
OSPFv3 Area (0.0.0.1) topology
Type ID(If-Index) Bits Metric Next-Hop Interface
Rtr 1.1.1.1 --
Rtr 2.2.2.2 1 2.2.2.2 GE0/1
Rtr 3.3.3.3 1 3.3.3.3 GE0/1
Rtr 4.4.4.4 1 4.4.4.4 GE0/1
Net 4.4.4.4(983049) 1 0.0.0.0 GE0/1
Table 185 Command output
Field Descri
p
tion
Type Type of node
ID(If-Index) Router ID
Bits Flag bit
Metric Cost value
Next-Hop Next hop
Interface Ourgoing interface
display ospfv3 vlink
Syntax
display ospfv3 [ process-id ] vlink [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level