R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

748
Field Descri
p
tion
SPI SPI defined in the IPsec policy.
enable ipsec-policy (OSPFv3 area view)
Syntax
enable ipsec-policy policy-name
undo enable ipsec-policy
View
OSPFv3 area view
Default level
2: System level
Parameters
policy-name: IPsec policy name, a string of 1 to 15 characters.
Description
Use enable ipsec-policy to apply an IPsec policy in the OSPFv3 area.
Use undo enable ipsec-policy to remove the IPsec policy from the OSPFv3 area.
By default, no IPsec policy is applied in an area.
The IPsec policy to be applied must have been configured.
Examples
# Apply IPsec policy policy001 to OSPFv3 area 0.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] area 0
[Sysname-ospfv3-1-area-0.0.0.0] enable ipsec-policy policy001
filter-policy export (OSPFv3 view)
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ bgp4+ | direct | isisv6 process-id |
ospfv3 process-id | ripng process-id | static ]
undo filter-policy export [ bgp4+ | direct | isisv6 process-id | ospfv3 process-id | ripng process-id |
static ]
View
OSPFv3 view
Default level
2: System level
Parameters
acl6-number: Specifies the ACL6 number, ranging from 2000 to 3999.