R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

752
[Sysname] ospfv3
[Sysname-ospfv3-1] import-route ripng 10 type 2 cost 50
# Configure OSPFv3 process 100 to redistribute the routes found by OSPFv3 process 160.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] import-route ospfv3 160
log-peer-change
Syntax
log-peer-change
undo log-peer-change
View
OSPFv3 view
Default level
2: System level
Parameters
None
Description
Use log-peer-change to enable the logging on neighbor state changes.
Use undo log-peer-change to disable the logging.
With this feature enabled, information about neighbor state changes of the current OSPFv3 process will
display on the configuration terminal.
Examples
# Disable the logging on neighbor state changes of OSPFv3 process 100.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] undo log-peer-change
maximum load-balancing (OSPFv3 view)
Syntax
maximum load-balancing maximum
undo maximum load-balancing
View
OSPFv3 view
Default level
2: System level
Parameters
maximum: Maximum number of equal-cost routes, which ranges from 1 to 8.