R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

754
ospfv3 area
Syntax
ospfv3 process-id area area-id [ instance instance-id ]
undo ospfv3 process-id area area-id [ instance instance-id ]
View
Interface view
Default level
2: System level
Parameters
process-id: OSPFv3 process ID, in the range of 1 to 65535.
area-id: Area ID, a decimal integer (in the range of 0 to 4294967295) that is translated into IPv4 address
format by the system or an IPv4 address.
instance-id: Instance ID of an interface, in the range of 0 to 255. The default is 0.
Description
Use ospfv3 area to enable an OSPFv3 process on the interface and specify the area for the interface.
Use undo ospfv3 area to disable an OSPFv3 process.
OSPFv3 is not enabled on an interface by default.
Examples
# Enable OSPFv3 process 1 on an interface that belongs to instance 1 and specify area 1 for the
interface.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ospfv3 1 area 1 instance 1
ospfv3 bfd enable
Syntax
ospfv3 bfd enable [ instance instance-id ]
undo ospfv3 bfd enable [ instance instance-id ]
View
Interface view
Default level
2: System level
Parameters
instance-id: Instance ID of the interface. It ranges from 0 to 255 and defaults to 0.
Description
Use ospfv3 bfd enable to enable BFD for link failure detection on an OSPFv3 interface.
Use undo ospfv3 bfd enable to disable BFD on the OSPFv3 interface.