R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

768
Ke
y
words Function
suppress-policy
Used to create a summary route and suppress the advertisement of some
summarized routes. If you want to suppress some routes selectively and leave other
routes still advertised, use the if-match clause of the route-policy command.
origin-policy Selects only routes satisfying the routing policy for route summarization.
attribute-policy
Sets attributes except the AS-PATH attribute for the summary route. The same work
can be done by using the peer route-policy command.
Description
Use aggregate to create an IPv6 summary route in the IPv6 BGP routing table.
Use undo aggregate to remove an IPv6 summary route.
By default, no summary route is configured.
Examples
# In IPv6 address family view, create a summary of 12::/64 in the IPv6 routing table.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] aggregate 12:: 64
balance
Syntax
balance number
undo balance
View
IPv6 address family view, IPv6 BGP-VPN instance view
Default level
2: System level
Parameters
number: Number of BGP routes participating in load balancing, which ranges from 1 to 8. When it is set
to 1, load balancing is disabled.
All firewalls support the number argument, and the argument has different value ranges:
F1000-A-EI/S-EI F1000-E F5000 Firewall module
1 to 8 1 to 8 1 to 16 1 to 8
Description
Use balance to configure the number of routes participating in IPv6 BGP load balancing.
Use undo balance to restore the default.
The feature is not available by default.