R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

775
Description
Use display bgp ipv6 group to display IPv6 peer group information.
If no ipv6-group-name is specified, information about all peer groups is displayed.
Examples
# Display the information of the IPv6 peer group aaa.
<Sysname> display bgp ipv6 group aaa
BGP peer-group is aaa
Remote AS 100
Type: internal
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 15 seconds
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
2001::1 100 0 0 0 0 00:00:07 Idle
Table 188 Command output
Field Descri
p
tion
BGP peer-group Name of the peer group.
Remote AS
AS number of the peer group.
If the peer group AS number has been specified with the peer
ipv6-address as-number as-number command, the specified AS
number is displayed in this field. Otherwise, a "Remote AS
number not specified" prompt is displayed.
Type
Type of the peer group:
• internal—iBGP peer group.
• external—eBGP peer group.
Maximum allowed prefix number Maximum allowed prefix number.
Threshold Threshold value
Configured hold timer value Holdtime.
Keepalive timer value Keepalive interval.
Minimum time between advertisement runs Minimum interval between advertisements.
Route refresh capability has been enabled The route-refresh capability has been enabled.
ORF advertise capability based on prefix
(type 64):
The BGP peer supports the ORF capability based on IP prefix.
The capability value is 64.
Local: both
The local BGP router supports both the ORF sending and
receiving capabilities.