R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

782
10-Jul-2008 09:23:00 Up
10-Jul-2008 07:46:17 Down Receive Notification with Error 3/2
UPDATE Message Error/Unsupported optional Parameter
10-Jul-2008 06:23:00 Up
10-Jul-2008 05:46:17 Down Send Notification with Error 6/4
Administrative Reset
Table 193 Command output
Field Descri
p
tion
Peer IPv6 address of the peer
Date Date on which the Notification was sent or received
Time Time at which the Notification was sent or received
State
BGP session state, which can be:
• Up—Indicates the BGP session is up.
• Down—Indicates the BGP session is down.
Notification Notification message
Error/SubError
• Error—Refers to the error code, which identifies the type of the Notification.
• SubError—Refers to the error subcode of the Notification, which identifies the specific
information about the reported error.
display bgp ipv6 peer received ipv6-prefix
Syntax
display bgp ipv6 peer { ip-address | ipv6-address } received ipv6-prefix [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ip-address: IP address of a BGP peer.
ipv6-address: IPv6 address of a BGP peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp ipv6 peer received ipv6-prefix to display the prefix entries in the ORF information of the
specified BGP peer.